隨著社會經濟的發(fā)展，我們對于各種裝修材料的需求也在日益增加，鐵藝大門的古樸典雅，讓它越發(fā)的受歡迎，下面濟南鐵藝大門廠家就帶大家來具體了解一下別墅鐵藝大門的焊接工藝。

With the development of society and economy, our demand for various decoration materials is also increasing. The simplicity and elegance of the iron gate make it more and more popular. Below, the Jinan iron gate manufacturer will take you to learn more about the welding process of the villa iron gate.

1、別墅鐵藝大門邊框焊接：框架焊接應根據(jù)別墅鐵藝大門的框架尺寸定位在地面上。將框架材料兩端的寬邊切成45度再進行焊接。

1. Welding of villa iron gate frame: The frame welding should be positioned on the ground according to the frame size of the villa iron gate. Cut the wide edges at both ends of the frame material into 45 degrees before welding.

2、每扇別墅鐵藝大門中間要焊接3根長立管，均勻分布在框架內，定位距離為339mm，定位后先點焊，然后找平待檢查正確后再焊接牢固。

2. Three long vertical pipes should be welded in the middle of each villa's iron gate, evenly distributed within the frame, with a positioning distance of 339mm. After positioning, spot welding should be carried out first, and then leveling should be carried out to ensure proper inspection before welding is firm.

3、別墅鐵藝大門用橫管焊上四根矛頭，擺好位置，先點焊，再找平，檢查無誤后再進行滿焊。

3. The iron gate of the villa is welded with four spear heads using a horizontal pipe, placed in position, spot welded first, leveled again, and fully welded after inspection.

4、每扇別墅鐵藝大門焊接時，會根據(jù)圖紙來進行位置排列，為了防止別墅鐵藝大門焊接的時候變形，會要求隔離焊接。因為材料使用較多，會存在焊點，所以焊接好了之后，各個焊點位置應該打磨打磨，不讓它太突兀。

4. When welding each villa iron gate, the position will be arranged according to the drawings. In order to prevent deformation during welding of the villa iron gate, isolation welding will be required. Due to the frequent use of materials, there may be solder joints. Therefore, after welding, each solder joint position should be polished and polished to avoid being too abrupt.

5、別墅鐵藝大門上方的槍頭焊接，也是在上下相應的位置，依次焊接每個槍頭，先讓槍頭垂直于橫桿，正面朝前且不扭曲，點焊慢慢調整，調整無誤后，先滿焊到框架上，然后整體再檢查一遍，然后焊牢。

5. The welding of the gun heads above the iron gate of the villa is also carried out at the corresponding positions up and down. Each gun head is welded in sequence, with the gun head perpendicular to the crossbar and facing forward without distortion. The spot welding is slowly adjusted, and after the adjustment is correct, it is fully welded to the frame first. Then, the overall inspection is conducted again, and then the welding is firmly welded.

以上就是濟南鐵藝大門廠家為大家?guī)淼娜績热?，希望能夠幫助到大家，若大家有需要或者有其他想要了解的內容，歡迎留言咨詢我們http://eastagcn.com.cn

The above is all the content that Jinan Iron Art Gate manufacturer has brought to you. We hope it can help you. If you have any needs or other information you would like to know, please feel free to leave a message and consult us http://eastagcn.com.cn